1
Handling and Safety Precautions
These precautions should be strictly observed in order to ensure safe, long-term
use of the product.
The following precautions should be observed particularly strictly:
1. This product is made from a special silicone with a feel similar to that of a living body. Please handle
it carefully, as you would a living body, as much as possible. The application of excessive force may
damage the product.
2. If you sense any abnormalities in action during use, immediately cease training and have the
product inspected and repaired by our company.
3. Under any circumstances, avoid using this product outdoors on rainy days, in damp conditions, or
when the product is wet, as this may cause damage.
4. Avoid exposing this product to direct sunlight as much as possible when using it outdoors.
5. Use AA size alkaline batteries for the main body of the model.
Do not mix old and new batteries or batteries of different types.
Doing so may cause fire, injury or fouling of the surrounding area due to rupture and leakage of
battery fluid.
Turn off the power of the main body of the model before inserting or replacing batteries.
6. Remove the batteries when storing this product. Otherwise, fluid may leak from the batteries.
7. This model is designed for use in the general environment. Please do not use it in a heavy industry
environment.
8. This product is not approved for sale in European countries other than the UK, Germany, France,
Spain, and the Netherlands.
Caring for the model after use
1. After use, turn off the power switch of the main body of the model and then remove batteries.
2. Any oil-based ink, pencil, chalk, paint, etc., used will soak into the model and become impossible to
remove. Do not use any of these under any circumstances.
3. If the skin of the model becomes dirty, wipe it off with a soft cloth such as gauze soaked in mild
detergent diluted with water.
4. To remove tough stains, wipe them off with a soft cloth such as gauze soaked in ethanol for
disinfection.
5. Avoid using solvents such as paint thinner or benzene under any circumstances.
6. Store the model in the correct position to avoid deformation.
7. Store the model in a place where it will not be exposed to direct sunlight or ultraviolet light.
Summary of Contents for LM-111GM
Page 2: ...1000...
