11
3-3 Insertion of Catheterization Catheter
1. Please open the clamp for irrigator tube and check whether or not the water leaks from the
simulator.
* When practicing the cleaning or disinfecting of the pubic area, please use water instead of
disinfection liquid.
2. Please apply lubricant on the distal end of the catheter for about 4 to 5 cm and insert the
catheter.
* If it is diffi cult to insert the catheter, please check the techniques and insert it again. In this
case, please remove moisture from the catheter and increase the amount of the lubricant
to be applied. Also, please consider using other types of catheters (fi rm silicone catheter or
catheter with thinner baloon part etc). The simulator may be broken if he catheter is forced
to be inserted.
* If it is diffi cult to insert the catheter, please use water mixed with a small amount
(approx 5%) of surfactant (neutral detergent) as urine.
* If the insertion of the catheter is repeated a plurality of times, water may accumulate in the
urethral canal.
3. Please check the outfl ow of the urine (water). If urine does not flow out, check the following:
- Whether the catheter passes through the valve;
- Whether the clamp for irrigator tube is open; and
- The amount of water in the bag for irrigator is reduced to a small amount.
4.
When indwelling the catheter, please inflate the balloon after inserting the catheter apart
from the balloon end portion by a distance equal to or greater than 4 cm. Indwelling of the
catheter in an intermediate of the valve causes the valve and the catheter to be broken. Please
provide a marker on the catheter before commencing training to ensure that the catheter tip
is inserted by a distance equal to or greater than 4 cm before infl ating the balloon.
4cm
Marker
Summary of Contents for LM-109FA
Page 2: ...10000...
