15
9. Care for Intramuscular Injection Parts
1. Remove the main body from the stand pole.
When attached to the pole, the main body can be removed by raising slightly and then pulling.
2. Take off upper arm skin and remove intramuscular injection gel bag and intramuscular injection
sponge.
3. Squeeze gently to remove the fluid remaining in the intramuscular injection gel bag and sponge.
4. Dry moisture remaining on or in all components. Insufficient drying may lead to mold. After drying,
always apply baby powder. If this is not done, the skin and injection site may stick together and make
set up difficult the next time the Training Arm is used.
5. Wipe off fluid remaining on the main body. If difficult-to-remove smudges or marks are present, wash
with water and dry thoroughly.
Summary of Contents for LM-074
Page 2: ...10000 ...