manualshive.com logo in svg

KOKEN Colonoscopy Lower GI Endoscopy Simulator Type II, Instruction Manual, Page: 11 / 26

Share
Download
KOKEN Colonoscopy Lower GI Endoscopy Simulator Type II Instruction Manual Download Page 11

10

7. Apply lubricant to the ascending colon.
Squeeze lubricant into the intestine. After inserting a generous amount, squish the intestine together 
so that the lubricant spreads all the way through it.

3-2  How to assemble the intestine
○ Assembling the lubricated intestine

1. Reconnect the disassembled descending colon to the rectum/sigmoid colon and transverse colon.

*    Make sure to align notch marks on each connector.

 

- 9 - 

7.  Apply lubricant to the ascending colon. 

Squeeze lubricant into the intestine. After inserting a generous amount, squish the 

intestine together so that the lubricant spreads all the way through it. 

3-2  How to assemble the intestine 

 Assembling the lubricated intestine 

1.  Reconnect the disassembled descending colon to the rectum/sigmoid colon and 

transverse colon. 

* Make sure to align notch marks on each connector.

Rectum/sigmoid colon 

and descending colon 

Transverse colon and 

descending colon 

Male 

Female 

 

- 9 - 

7.  Apply lubricant to the ascending colon. 

Squeeze lubricant into the intestine. After inserting a generous amount, squish the 

intestine together so that the lubricant spreads all the way through it. 

3-2  How to assemble the intestine 

 Assembling the lubricated intestine 

1.  Reconnect the disassembled descending colon to the rectum/sigmoid colon and 

transverse colon. 

* Make sure to align notch marks on each connector.

Rectum/sigmoid colon 

and descending colon 

Transverse colon and 

descending colon 

Male 

Female 

 

- 9 - 

7.  Apply lubricant to the ascending colon. 

Squeeze lubricant into the intestine. After inserting a generous amount, squish the 

intestine together so that the lubricant spreads all the way through it. 

3-2  How to assemble the intestine 

 Assembling the lubricated intestine 

1.  Reconnect the disassembled descending colon to the rectum/sigmoid colon and 

transverse colon. 

* Make sure to align notch marks on each connector.

Rectum/sigmoid colon 

and descending colon 

Transverse colon and 

descending colon 

Male 

Female 

Summary of Contents for Colonoscopy Lower GI Endoscopy Simulator Type II



























Reviews:

No comments