qb701 User
’s
Manual
30
PARAMETERS
In Main Menu run
Vertical
program.
Choose
New Task
.
Machine dimensions / measurement setup screen
Press
key to edit dimensions values
Press
key for parameters/key legend:
Press
- to toggle data input
–
LD transducer’s data / MD –
manual data
Press
- to toggle angle input
–
IA use inclinometer / MA
manual angle. Manual angle input used for vertical machines,
since electronic inclinometer cannot be used.
Press
- to toggle displayed precision
–
2 or 3 digits.
Press
- to toggle measurement mode: Clock mode
9-12-
3 o’clock
–
readings to be
taken at three predefined shaft positions
–
9 o’clock, then 12 o’clock, then 3 o’clock.
Device will proceed to the result screen then.
Press
to switch displayed units mm/inch
