KOHTECT BT-77
1.5.1 Operation Keys
Turn O�
Enter setup menu
OK / Start
Return / back to earlier step
Adjust up or increase
Adjust down or decrease/ OFF (press and hold)
2.0 TAKING MEAUSREMENT WITH THE INSTRUEMNT
Before using the instrument, it is a good practices to check proper mechanical functioning
of the controls, connectors and power state when switch on.
Note the device automatically switches off after 150 seconds when no further
operation.
2.1 Instrument Display and Measuring Modes
To switch “O�” the BT-77 bearing tester, press
. The device perform self test
as shown in Fig-2.1 and automatically enter the first default operation mode - USB
interface, Fig-2.2.
To connect device to PC for report print and view, make sure device is set in USB
interface mode and press
to ready for interface. Connect the USB cable
between device and PC via the USB port.
To go to other mode, press either
or
to scroll through the four operating
mode option.
Fig-2.1 Fig-2.2
B e a r i n g T e s t e r
K o H T E C T B T - 7 7
( c ) 0 7 0 1 0 8 v 3 . 0 1 c
N o . 1 2 3 4 4 5 5
w w w . k o h t e c t . c o m
U S B i n t e r f a c e
*
3 . 0 2 v
2 5 m a r 0 7 1 4 : 3 0 : 5 0
7
Summary of Contents for BT-77
Page 1: ...BT 77 Bearing Tester with Non Contact Tacho Operating Instruction Manual...
Page 2: ......
Page 4: ...KOHTECT BT 77...
