UNPACKING INSTRUCTIONS
Open the shipping carton and carefully remove the foam inserts
from around the locomotive and tender. The loco and tender should
be removed from the case by placing your hands under the wooden
shipping board which each piece is wrapped on. With the two units
of the model removed from the box, look for the overlap in the plastic
wrapping and carefully unwrap it from both units. With the plastic
removed, undo the tape that secures the inner wrapping, this will
expose the model. Use great care in opening the tissue that surrounds
the model as it tends to snag on small detailing when it is pulled
open. When lifting the model from the shipping board be careful not
to press in on any of the side rods, this will create misalignments
during operation. (NOTE: All packing material should be saved for
future reference)
