3
PREPARE THE UNIT
PREPARE THE UNIT
A.
2000
(907
)
2
4
2
6
2mm
·
·
·
·
·
·
·
A. Prepare the Site
NOTICE: Make sure the floor will support 2000lbs.
(907kg).
For drop-in or raised-deck installations:
This is the combined weight of the bath, water,
and two bathers.
Make sure the flooring offers adequate support for
your bath, and verify that the subfloor is flat and
level.
When constructing the framing, allow for the
thickness of the finished wall materials.
Frame
the floor, or construct 2
4 or 2
6 stud framing
according to the roughing-in information. Ensure
that there is a 1/16
Position the plumbing according to the roughing-in
information. Cap the supplies and check for leaks.
·
·
·
·
·
CAUTION: Risk of product or property
damage.
Do not support the bath by the rim.
Provide adequate support under the feet.
" (2mm) gap between the finished
deck/floor surface so the bath does not rest on the
rim. Use the template packed with the bath to
carefully lay out and cut the rough deck material.
Make sure the drain location corresponds to the
bath outlet.
Position the plumbing
according to the roughing-in information. Cap the
supplies and check for leaks.
Install the finished
flooring and wall materials.
·
·
For all installations:
For freestanding installations:
B. Prepare the Bath
CAUTION: Risk of personal injury.
CAUTION: Risk of product or property
damage.
Cast iron
baths are extremely heavy. Obtain sufficient help
to carefully lift or move the bath.
Do not support the bath by the rim.
Provide adequate support under the feet.
·
·
Install the drain to the bath according to the drain
manufacturer
instructions. Do not connect the trap
at this time.
Position a clean drop cloth or similar material in the
bottom of the the bath. Be careful not to scratch the
surface of the bath.
,
s
B.
·
·
1023725-T01-A