1-1/4"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
240 V, 15 A, 50/60 Hz
Blower, Heated
Surface:
Technical Information
If relocating the blower motor, do not relocate or
alter the PVC tee or coiled flexible tubing
All product dimensions are nominal.
Three-wall alcove
Installation:
connected to the blower. Follow the blower
relocation instructions exactly. Provide access
for servicing the blower.
Left
Drain location:
42-3/8" x 20" (1076 mm x 508 mm)
Basin area, bottom:
ADA compliant when installed to the specific
requirements of these regulations.
54-3/8" x 24-5/16" (1381 mm x 618 mm)
Basin area, top:
106 lbs (48.1 kg)
Weight:
44 lbs/ft² (214.8 kg/m²)
Minimum floor load:
15-1/16" (383 mm)
Water depth:
59.8 gal (226.4 L)
Water capacity:
Blower: 240 V, 5 A, 50/60 Hz
Heated Surface: 240 V, 0.5 A, 50/60 Hz,
65 W
Electrical component
rating:
Variable
Blower speed:
2-1/2" (63 mm)
Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
9-7-2019 05:55 - US/CA/MX
Underscore
®
Rectangle
5' BubbleMassage
™
Bath
K-1167-GLW
