3
114407-2-
CA
(9631)
Kohler Co., Kohler, WI
marble or solid surface countertops upside down on
foam padding. Drill 3/8” diameter holes, 5/8” deep in the
locations shown. Locate the lead anchors in the holes
using a setting tool. Tap the setting tool with a hammer to
set the lead anchors in position.
NOTE: The insert must be properly installed to ensure
proper fit.
NOTE: For wood countertops, pre-drill the holes for wood
screws in the locations shown. Waterproof unprotected
areas of wood.
SEALANT
3/8” D.
5/8”
LAVATORY
MARBLE SLAB
INSTALLATION
WOOD COUNTER
INSTALLATION
LAVATORY
SEALANT
Fig. #5
Follow the instructions listed on the sealant label. Allow
the sealant to set for 30 minutes or longer before
proceeding.
Connect the drain fittings and faucet supply fittings.
Turn on the water, and check for leaks at all connections.
Fig. #6
SELF-RIMMING INSTALLATION
Determine the faucet centerline location. Consider the
faucet and handle escutcheon diameters, the length of
the spout, and the clearance between the spout and the
lavatory rim.
Calculate the faucet centerline measurement by first
dividing the escutcheon diameter in half, and then add
1/4”.
NOTE: Round this calculation up to the nearest 1/16”, if
necessary.
Fig. #1
