Kohler STILLNESS K-45130T Installation Instructions Download Page 4

6. Plug in and the product is ready for use. Unplug when the

product is not in use. It is suggested to install a socket with
a switch or a timing switch. Switch off when the product is
not in use.

6.

/

1. The accessories should be washed with warm water and a

soft cloth or sponge. Do not use abrasive cleaners or
cleaners containing bleach.

2. Turn off power supply prior to removing outer case.

3. Do not use eradicator, abrasive powder or oil, acid or alkali

liquid detergent for cleaning.

4. Do not bump the casing.
5. For indoor installation and use only.

1.

(

)

2.

3.

4.

5.

CARING FOR YOUR PRODUCTS

CARING FOR YOUR PRODUCTS

Fig. D

D

Power line is 150cm long

150

-4-

1190155-T01-C

Summary of Contents for STILLNESS K-45130T

Page 1: ...Towel warmer must be installed so that the buttom rail is at least 600mm above the floor to avoid a hazard for children The cord extension set must be positioned so that it is not subject to splashing or ingress of moisture This towel warmer is intended only for drying textiles that have been washed in water Fabrics that contain soap or detergent residue or any other liquid or substance may discol...

Page 2: ...onductor supplying this equipment Pressure wire connectors are provided on the exterior of the junction box or control within this unit to permit connection of a bonding conductor between this unit and all other exposed metal in the vicinity as needed to comply with local requirements The power line is 150cm long Please pre install a three pin socket complying with Chinese national standards It is...

Page 3: ...eon and place the towel warmer to the desired place on the wall for installation 2 Mark the screw holes for the wall hung bracket with a pencil See Fig A 3 Drill holes at the place marked in step 2 with a 6mm drill and insert wall plugs 4 Fix the wall hung bracket onto wall with screws See Fig B 1 2 A 3 6mm 2 4 B Fig A A Fig B B Screw Towel Warmer Wall hung Bracket Wall hung Bracket 1190155 T01 C ...

Page 4: ...hed with warm water and a soft cloth or sponge Do not use abrasive cleaners or cleaners containing bleach 2 Turn off power supply prior to removing outer case 3 Do not use eradicator abrasive powder or oil acid or alkali liquid detergent for cleaning 4 Do not bump the casing 5 For indoor installation and use only 1 2 3 4 5 CARING FOR YOUR PRODUCTS CARING FOR YOUR PRODUCTS Fig D D Power line is 150...

Reviews: