US Patent No. 5,164,861
SS529 SOMM. REV. 1 12/00
SWING OUT MAGNIFYING MIRROR
INSTRUCTIONS
1. Do NOT remove mirror from cardboard template!
2. Align arrow edge of template with inside edge of
door opposite hinges at the desired height.
Mirror can be placed on a left or right hinged
door, simply turn template around. Please note
that shelves in MP Series Cabinets must be
moved above or below magnifying mirror.
3. Remove packing tape from the template and
release liner from upper and lower hinge on the
back of the template and place at desired
height.
Press
fi rmly over hinge area.
4. Carefully separate cardboard template by
tearing along perforations. Slide template out
from back of mirror.
5. Mirror will click open when pulled from side
opposite hinge. Press fi rmly on the upper and
lower hinge to insure adhesion.
6. Leave mirror in closed position 4 hours before
using. Problems? Call Robern’s Toll Free Line
800.877.2376
Robern
701 N. Wilson Ave.
Bristol, PA 19007
800.877.2376
24 HOURS
BACK OF
TEMPLATE
(If mirror is dislodged from template, reinstall hinge
pieces as shown below and press template printed
side down over hinge assembly.)
