1230971-2A-D
2
1230971-2A-D
3
INSTALLATION
INSTALLATION CHECKOUT
CLEANING INSTALLATIONS
How to Install the Faucet
Install the mounting stud(1) into the faucet body base(2). Stick the
washer(3) under the body assembly. Insert the flexible supply hoses(4)
into the sink.
From underside of the sink, place the washer(5) (rubber washer is on the
top) and the nut(6) onto mounting stud. Position the faucet so that the
handle is on the right side. Tighten nut to secure faucet to the sink.
Attach the hoses to water supplies. When facing the faucet, the hose in
front connects to hot water, the back hose with ‘COLD’ label connects to
cold water.
Ensure that all connections are tightened and the handle is in the off
position.
Open the drain. Turn on main water supply and check for leaks. Repair
as required.
Remove the aerator(8) with the key(7). Turn the faucet handle on. Run
hot and cold water through the spout for about one minute to remove any
debris. Remove debris from the aerator. Shut off the faucet and reinstall
the aerator.
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
**Color code must be specified when ordering
PURIST
SERVICE PARTS
7507T-B4
Single Hole Kitchen Faucet
1
2
3
4
5
6
7
8
"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953
834754
1222606
1099021
870533
1213241
1237493**
836549
1086390
1099015
1099016**
1243258**
833438
89098
1101479
1101283
3006146
834705**
