9.
Pressure Adjustments
The pressure setting is preset at the factory to
achieve optimum pressure and cleaning. If you need
to lower the pressure, it can be accomplished by
these methods.
1. Back away from the surface to be cleaned. The
further away you are, the less the pressure will be
on the surface to be cleaned.
2. Use the Dial-N-Wash to increase and decrease
the pressure. Refer to the Dial-N-Wash Adjust-
ment paragraph.
NOTE:
DO NOT attempt to increase pump pressure.
A higher pressure setting than the factory set
pressure may damage pump.
How to use the Spray Wand
The nozzles for the spray wand are stored in the
nozzle holder on the panel assembly. Colors on the
panel identify nozzle spray pattern.
Refer to the following chart to choose the correc
nozzle for the job to be performed.
Operating the Power Washer
NOTE:
The high pressure spray from your pressure
washer is capable of causing damage to surfaces
such as wood, glass, automobile paint, auto striping
and trim, and delicate objects such as flowers
and shrubs. Before spraying, check the item to be
cleaned to assure yourself that it is strong enough to
resist damage from the force of the spray.
Red - 0
o
USES:
SURFACES:
Powerful pinpoint
for spot cleaning
of hard, unpainted
surfaces or for
high reach areas.
Intense cleaning
of unpainted
hard surfaces.
Standard cleaning
nozzle for most
applications.
Cleaning of
painted or
delicate surfaces.
Applies cleaning
solutions.
Unpainted metal
or concrete.
DO NOT use on
wood.
Grills, driveways,
concrete or
brick walkways,
un-painted brick or
stucco
Yard tools, sidewalks,
unpainted siding, lawn
furniture, stucco,
concrete, gutters and
eaves, brick surfaces.
Auto / RV, marine,
wood, painted brick
and stucco, vinyl,
painted siding.
Low pressure spray is
safe on all surfaces.
Always verify compat-
ibility of cleaning
solution prior to use.
Yellow - 15
o
Green - 25
o
White - 25
o
Black -
Low
Pressure
7109782 PS3395 EuroQuip Manual.indd 9
4/4/2017 9:44:00 AM
