BEFORE YOU BEGIN
ODEON
INSTALLATION INSTRUCTIONS
VITREOUS CHINA P/S-TRAP TOILET
S-TRAP 305mm K-8766 LM
P-TRAP 180mm K-8711 LM
Ÿ
Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow
the sections that pertain to your particular installation. This will help you avoid costly mistakes. In addition to Proper installation,
read all operating and safety instructions.
Ÿ
All information in these instructions is based upon the latest product information available at the time of publication.
Kohler India reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
Ÿ
These instructions contain important care, cleaning, and warranty information-
please leave instructions for the consumer.
ORDERING INFORMATION
Odeon S-Trap 305mm Toilet...............................K-8766LM Odeon P-Trap 180mmToilet..............................K-8711LM
Includes seat.................................................K-8827LM Includes Seat.............................................K-8827LM
Includes bowl................................................K-8767LM Includes bowl.............................................K-8709LM
Includes tank.................................................K-8710LM Includes tank..............................................K-8710LM
NOTES
Ÿ
Observe all local plumbing and building codes.
Ÿ
Shut off the water supply.
Ÿ
Ensure that the new drain and shut-off valve have the correct roughing-in dimensions. See Fig.#1.
Ÿ
Be very careful while working with vitreous china products. Vitreous china can break or chip if the bolts or nuts are overtightened, or
if carelessly handled.
Ÿ
Carefully inspect the new fixture for any sign of damage.
Ÿ
Fixture dimensions are nominal and conform to tolerances established by ASME Standards (A112. 19.2-2003)
TOOLS AND MATERIALS REQUIRED
(Not supplied)
Ÿ
254mm adjustable wrench
Level
Screwdriver
Ÿ
Metal file (file cut)
Hacksaw
Straight pipe coupling
Ÿ
Tape measure
Putty knife Connection packaging
Ÿ
Tubing cutter
Toilet supply shut-off valve. 15mm (½") recommended
WARNING: Risk of external leakage.
The valve nut has been factory-tightened. Wrench tighten
1/4 turn past finger tight.
NOTICE:
If no shut-off valve exists, install a shut-off valve below the tank before installing the new toilet.
Flexible hose are recommended to connect the supply line to the fill valve. If you use a rigid connection, take care not to apply side
forces to the bottom of the fill valve.
1037406-LM01-B -1-
