3.
清洗过滤系统
3. Clean the Filtration System
The faucet includes connector assembly with high quality
filtration system. If there is a lot of debris in the supply pipes
or the quality of water is bad, it will cause the flow in bad
condition. Please clean th filtration system as following
steps:
(1) Close the angle valve.
(2) Remove the valve assembly and take out the filter for
cleaning, then re-install it.
Notice: Make sure to install the filter washer after cleaning
the filter.
该感应龙头的阀体组件内已包含了优良的过滤装
置。如管内杂质过多或水质较差，长期使用会引
起出水情况不良。请按以下步骤清洗过滤装置：
(1)
关闭角阀。
(2)
将主阀体组件取下，拿出滤网，用水冲洗完
毕后，重新装入。注意：在清洗完滤网后，不要
遗失平垫。
4.
自动清洗存水功能
.
When the faucet is no used for a long period of time, it
will automatically flush to discharge the stagnant water
inside the faucet every 24hrs.
感应龙头长期处于不使用状态时，
每间隔
24
小时自动冲水一段时间
排出龙头内的存水。
Self-Cleaning the stagnant water
10
1495657-T2
-A
