8
1.
Decide on a suitable position for the slide bar
avoiding buried cables and pipes.
2. Important!
The slide bar has an applicator
fi tted to one end to assist the assembly of
the slide bar through the clamp bracket (see
illustration). With the clamp bracket button
FULLY
depressed carefully ease the slide
bar through the hole in the clamp bracket,
take care not to dislodge the constant friction
mechanism or friction pad.
3.
Release the clamp bracket button. Remove
the applicator from the slide bar and store in
a safe place for future use.
4.
Slide the hose retaining ring onto the slide bar
below the clamp bracket.
5.
Make sure that the slots in the slide bar are
aligned with the lugs in the support and fi t the
two slide bar supports to the ends of the slide
bar. Make sure that each support is pushed
fi rmly home.
Note!
If replacing an existing Mira Slide Bar
go to instruction 8.
6.
Using the assembled slide bar and supports as
a template, mark the position of the two fi xing
holes using the centre slot.
Warning!
Make sure that there are no buried
cables or pipes in the wall before drilling.
7.
Drill the two 8 mm holes for the fixing
screws and insert the wall plugs supplied.
(Alternatively use proprietary cavity fi xings
for dry lined, stud partition, shower cubicle or
laminated panel walls).
8.
Fix the bottom slide bar support to the wall
using the screw provided. Make sure that the
screw is fully tightened.
9.
Loosely screw the top slide bar support to the
wall. Press fi rmly down on the top slide bar
support and, while continuing to apply force,
fully tighten the screw.
10.
Fit the end caps to the slide bar supports.
11.
Pass the flexible hose through the hose
retaining ring.
12.
Screw the hose onto the showerhead and the
outlet of the shower control or RAC assembly
(Make sure the hose seals are fi tted)
Do not
overtighten
. Place the shower head into the
clamp bracket.
Clamp Bracket
Constant Friction
Mechanism and
Friction Pad
Applicator
Slide Bar
Wall Plug
Top Slide Bar Support
Fixing Screw
End Cap
Slide Bar
Clamp Bracket
Assembly
Hose Retaining
Ring
Slide Bar
Support Lug
Bottom Slide Bar
Support
End Cap
600
