1/2" (13 mm) R.
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A
Blower, Heated
Surface:
Technical Information
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
All product dimensions are nominal.
Three-wall alcove
Installation:
Left
Drain location:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
46" x 24" (1168 mm x 610 mm)
Basin area, bottom:
54" x 27" (1372 mm x 686 mm)
Basin area, top:
If installing a rim-mount faucet, make sure there
is no interference above or below the deck before
drilling any holes.
106 lbs (48.1 kg)
Weight:
44 lbs/ft² (214.8 kg/m²)
Minimum floor load:
14" (356 mm)
Water depth:
63 gal (238.5 L)
Water capacity:
Blower: 120 V, 10 A, 60 Hz
Heated Surface: 120 V, 0.5 A, 60 Hz, 65
W
Electrical component
rating:
2" (50 mm)
Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
5-2-2019 04:54 - US/CA
Mariposa
®
5' BubbleMassage
™
Bath
K-1239-GLW