14
111835-
CA
(1093)
Kohler Co., Kohler WI
14. CONFIRM PROPER OPERATION
A. START-UP WHIRLPOOL
Refer to Important Safety Instructions on page 2
before operating this whirlpool.
Please perform the following so that the owner may
safely receive the benefits of whirlpool bathing.
1.
Rotate jets so they are facing down toward basin.
2.
Fill the whirlpool bath to a water level at least 2”
above the top of the highest jet.
Water temperature in the whirlpool should not
exceed 104
_
F (40
_
C).
Bath
Wall
2” Minimum
Water Line
Jet Trim
B. OPERATING SEQUENCE
Refer to chart for proper operating sequence.
1.
Turn on the whirlpool jets. Adjust each jet for
optimum air/water mixture.
2.
A built-in timer automatically stops the motor after
20 minutes of operation.
Reduce
Air
Add
Air
TO
METHOD
OBSERVE
Turn on whirl-
pool massage.
Add air to whirl-
pool action, rotate
flange counter-
clockwise. To
reduce air, turn
clockwise.
Shut off whirlpool.
Restart whirlpool
after 20 minute
cycle is com-
plete.
