-2-
C. New or Replacement Installation
Requirements
This bath can be installed in new or existing bathrooms.
For replacement: Remove the old bath. Remove any
old plumbing that does not confo m to the rough-in
requirements.
For new installation: Position the plumbing according to
the rough-in dimensions. Cap the suppliers, and check
for leaks.
r
C.
SITE REQUIREMENTS
A.
A.
Preparation
Check the flooring under the bath, and make repairs as
needed.
Subfloor
Make sure the subfloor is level and flat. It is
strongly recommended to prepare waterproof layer for
the subfloor beforehand.
D.
D. Clearance Requirements
Check the rough-in and room dimensions to provide
adequate available space for the bath unit.
·
·
·
·
·
·
·
·
·
·
Adjustable pipe
wrench
Rule
Level
Safety shoes
Safety glasses
Square
Screwdriver
Pliers
Utility knife
Adjustable wrench
·
·
·
·
·
·
Plumbers putty
Wall coverings(as necessary)
Silicone sealant
Gypsum cement(optional)
Construction adhesive
(optional)
Protective covering for
bathtub
B. Materials Required
A. Tools Required
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
(
)
(
)
(
)
B.
A.
INSTALLATION REQUIREMENTS
C. Installation Note:
C.
:
Read the entire installation instructions included with
fixture before beginning the installation.
NOTE:
Damage occurred during transit shall not be
covered by warranty.
B. Product Inspection
Uncrate and inspect bath for damage. All Kohler s
baths have been manufactured with sophisticated
craftsmanship. However, please inspect for any
possible damage that may have occurred in transit.
Leave all materials in the crate during construction to
prevent damage.
'
B.
1216391-T01-C
