(If
customerpurchases
t
ee inlet
三通进水软管组件
用户自备角阀
外螺纹
如何转换成混水感应龙头
若用户另购三通进水软管组
件
）
1.
(
)
0.5mm
2
0.3mm
2
m
2.
s
AC power unit (sticker on the back) should be
installed in a dry place away from water. Customer
should prepare wire tube and wire according to their
requirement. Wire tube should be mounted into the
wall. Suggested wire: AC connection wire adopts wire
with protecting layer or sleeve and the section should
be ≥ 0.5mm
. The se
ction of DC connection wire
should be ≥ 0.3mm
.
The
connection pattern must
follow the illustrations above.
2.After wire layout finished, check and repair if needed.
Then connect AC connector to AC connector within
FPC pipe, DC connect or (black-orange) on electrical
box to faucet power cord connector (wire from valve
box). Finally turn on AC power source.Faucet will
work during this period.
(
)
AC
工作状态。
AC
DC
Tee , Inlet Assy
HOW TO CHANGE TO A MIXING SENSOR
FAUCET
8
1359745-T01
2
2
1.