6
_14
32
A
F
D
G
B
A
C
B
A
F
E
G
6.7
6.8
6.10
6.9
EN
INFORMATION ABOUT REPLACEMENTS
6.3 Remote oil filter cartridge replacement
(optional)
1.
Unscrew and remove the cartridge A using the appropriate
wrench.
2.
Lubricate the gasket and screw on the new cartridge A
using the appropriate wrench.
6.4 Fuel filter cartridge replacement
1.
Procure a suitable container to collect the fuel.
2.
Rotate the filter A to take it to the unlocked position and
remove it.
3.
Lubricate the gasket C of the new cartridge.Assemble the
new filter A on the support B and rotate it until reaches
the lock position.
Important
• Do not fill the new cartridge A with fuel.
4.
Loosen the air bleeding screw F on fuel filter bracket B e la
vite E posta sulla pompa
iniezione G.
5.
Turn the key on the control
panel to the ON position.
The electric pump D sends
fuel to the filter and then
the injection pump E. The
air inside the circuit and the
filter will begin to escape
from the screw F and E.
6.
Tighten the bleeding screw
F and E (tightening torque of
1.5 Nm) when the fuel begins
to flow F (tightening torque of
1
.
5 Nm
)
when the fuel begins
to flow.
6.5 Air filter cartridge replacement
NOTE:
Component not necessarily supplied by
KOHLER.
1.
Release the two fastenings F of the cover A.
2.
Remove the cartridge B.
3.
Reinstall:
-
the new cartridges B.
-
the cover A checking the right tightness of fastenings F.
ED0053029510
Index
