Kohler KD27V12 Operation And Maintenance Manual Download Page 63

Page: 63 / 112

Operation and Maintenance Manual

Operating fluids and maintenance

Daily, weekly and monthly maintenance work

5.13 Daily, weekly and monthly maintenance

work

Make sure that:

The Diesel engine is in the maintenance position.

5.13.1 Perform visual inspection (leaks, damage, loose

components).

Fig. 45: Overview of visual inspection

Turbocharger

Engine control unit

Oil module

High pressure pump
connectors

Main fuel filter

Oil filter

High pressure pump leakage

Crankcase breather

Visually check Diesel engine for leaks, ensure that it is not damaged and that
the fastenings comply with regulations.

Visually check V-space (area under high pressure pump and lines) for moisture.

KD27V12 33521029401_3_1 en 2017-07-01

Summary of Contents for KD27V12













































































































Search results

Summary of Contents for KD27V12

Reviews:

Related manuals for KD27V12

Brands by name

Popular brands

Kohler KD27V12, Operation And Maintenance Manual

Search results

Summary of Contents for KD27V12

Reviews:

Related manuals for KD27V12

Brands by name

Popular brands