Kohler KD27V12 Operation And Maintenance Manual Download Page 108

Page: 108 / 112

Operation and Maintenance Manual

Terms used (glossary)

7.3 Terms used (glossary)

Term

Explanation

Ready for use

The engine is ready for starting.

Emission optimized

Exhaust gas optimized

Fuel optimized

Device manufacturer The manufacturer of the overall plant in which the Diesel

engine is installed.

In operation

The engine is running.

Safety zone

Designated area around the engine, access to which in the
various operating modes is described in the chapter on
"Operating and maintenance areas".

Maintenance areas

Maintenance areas are the safety zones that have to be
accessed for maintenance work and troubleshooting.

Tab. 50

108

KD27V12 33521029401_3_1 en 2017-07-01

Summary of Contents for KD27V12













































































































Search results

Summary of Contents for KD27V12

Reviews:

Related manuals for KD27V12

Brands by name

Popular brands

Kohler KD27V12, Operation And Maintenance Manual

Search results

Summary of Contents for KD27V12

Reviews:

Related manuals for KD27V12

Brands by name

Popular brands