6. Install Single-Post Accessories
WARNING: Risk of personal injury and product damage.
Improper mounting of the accessory may cause damage to the
glass. Wall plates must be properly aligned and securely
anchored.
Loosen the setscrew in the post until the cylinder head slides out
of the post.
Slide the shaft of the cylinder head into the post.
Position the detent in the cylinder head shaft facing downward.
Use a hex wrench to thread a setscrew into the skirt and tighten
the setscrew until the cylinder head is securely in place.
If needed, insert the tissue spindle into the tissue holder
assembly.
Slide the applicable accessory into the slot in the bracket sleeve.
Tighten the setscrew using a hex wrench.
1020823-2-A
8
Kohler Co.
