7. Complete the Installation
Position the Spray Hose Weight
NOTICE:
Make sure that the spray hose weight will not interfere
with the valve box or wire connections.
Loosely attach the weight to the spray hose.
Position the weight approximately 11
″
(279 mm) from the bottom
of the hose loop.
Secure the spray hose weight in place by tightening the two
screws.
Extend and retract the spray hose to check for smooth operation.
Check for Leaks
Ensure all connections are tight.
Turn on the water supplies, and check all connections for leaks.
Test the faucet for proper operation. Refer to the
″
Faucet
Operation
″
section.
11"
(279 mm)
Kohler Co.
11
1281441-2-C
