3. Install the Drip Tray Mounting Plate
NOTE:
The drip tray is an optional accessory available for wall
mount but not for ceiling mount.
NOTE:
Install the 2x4’s so the drip tray is level or has a slight
forward slope to ensure proper drainage.
Attach a 2x4 flush to the back of the wall stud to support the
lower lip of the drip tray mounting plate. Position the 2x4 so it
will be 2
″
(5.1 cm) above the top of the bathing fixture.
Attach a second 2x4 so it is 5-5/8
″
(14.3 cm) above the first 2x4.
NOTE:
When 2x6 wall studs are present, install the 2x4’s so they are
supported 2
″
(5.1 cm) from the back of the wall stud.
Attach the drip tray mounting plate to the 2x4’s using six drywall
or #10x1
″
screws. Make sure the mounting plate is centered under
the spout’s location.
Stud
Install nut
and
washer.
Mounting
Plate
Bathing
Fixture
5-5/8"
(14.3 cm)
2"
(5.1 cm)
2x4's
Backup
Plate
Drywall or
#10 Wood
Screws
1006741-2-G
6
Kohler Co.
