Kohler K-8666X, Installation Manual

Page: 3 / 11

Kohler Co.
3 1004636-X01-A
1. Faucet Installation
Spout
Base
Handspray
Spray Holder
Gasket
Mounting Hole
Nut
Shank
Shank Tee
Handspray Hose
Nut
Washer
Sink
Spout
Apply plumbers putty
Rubber washer
† Apply a bead of plumbers putty or other sealant to the underside of the
spout base according to the manufacturer’s instructions.
† Thread the nut and washer to the bottom of the shank.
†
Insert the shank from the bottom of the sink.
† Thread the spout to the bottom of the shank, then loosen the spout 1/8 of
a turn.
† Tighten the nut and washer to secure the shank to the sink.
† Place the rubber washer to the spray holder.
† Slide the spray holder through the mounting hole from above.
†
Thread the gasket to the spray holder and securely hand tighten the nut
to the shank from under the sink.
† Insert the handspray hose through the spray holder.
† Attach the hose to the shank tee using thread sealant.