Kohler Co.
1
1066739-2-A
INSTALLATION GUIDE
TOILET SEAT
K-4761, K-4762
Remove the existing toilet seat and mounting hardware.
If necessary, clean the toilet surface.
Position the mounting bracket with flat side up and align the holes to the
toilet seat mounting holes.
Insert the bolts through the mounting bracket and the toilet seat mounting
holes.
Thread a nut onto each bolt.
Using a Philips screwdriver and an adjustable wrench, tighten the nuts.
Do not overtighten.
Position the toilet seat over the bowl and slide the toilet seat hinge plate onto
the mounting bracket. Press firmly into place.
Insert the hinge cover tabs into the hinge slots.
Press the hinge cover down until it snaps into place over the mounting
bracket.
Verify the seat is securely fastened. Make any adjustments as needed.
Install the Toilet Seat
Nut
Nut
Bolt
Hinge Slots
Hinge Cover
Tabs
Seat
Mounting Bracket
Hinge Plate
Bolt