Access the Faucet – K-2432 Model Only
WARNING: Risk of electric shock.
Turn the electricity off at the circuit breaker or fuse box before
accessing the faucet. When unplugged, the electric supply will no longer be electrically live, which
will eliminate the risk of electric shock.
WARNING: Risk of electric shock.
Do not plug any electrical device into the grounded outlet
inside the access panel. This grounded outlet is not intended for this type of application.
CAUTION: Risk of personal injury or product damage.
Use care to avoid mirror damage when
performing these steps.
NOTICE: Open the access panel for faucet maintenance only.
Open the Access Panel
Turn the electricity off at the circuit breaker or fuse box.
Close the lavatory drain. This will prevent the locking screws from falling down the drain during
the removal process.
Remove the two locking screws from the underside of the wall storage. Set the locking screws aside.
Pull the center access panel open, using the prop rod inside cabinet to hold the access panel open.
Perform faucet maintenance at this time. Refer to the homeowners guide packed with the faucet for
proper maintenance procedures.
Close the Access Panel
Disengage the prop rod from the access panel.
Close the center access door, taking care to make sure all utility lines are tucked into utility cavity
without being kinked or pinched.
Reinstall the two locking screws.
Open the lavatory drain.
Turn the electricity on at the circuit breaker or fuse box.
Access
Panel
Prop
Rod
Locking
Screws
Kohler Co.
7
1059686-5-D
