Kohler Co.
7
1042173-X2-A
2. Install the Lavatory
Dimensions are for Kohler faucets only. When using other faucets, contact
supplier for installation instructions and dimension.
Faucet Centers
Valve Holes
Spout Hole
Single Hole
1-1/4" – 1-1/2" (32-38 mm)
4" (101.5 mm)
1" – 1-1/2" (25-38 mm)
1" – 1-1/2" (25-38 mm)
8" (203 mm)
1" – 1-1/2" (25-38 mm)
1-1/4" – 1-1/2" (32-38 mm)
¨
Cut out the opening by carefully following the pencil line traced from the
template.
¨
Temporarily position the lavatory in the opening. Adjust the fit of the
lavatory.
¨
Remove the lavatory from the countertop.
¨
Drill the faucet holes using the above chart to determine their size.
¨
Install the faucet to the countertop according to the manufacturer’s
instructions.
¨
Install the drain to the lavatory according to the manufacturer’s
instructions.
¨
Carefully position the lavatory in the cut-out.
¨
Apply a thin, continuous bead of sealant around the lavatory edges.
¨
Immediately wipe away any excess sealant, and fill any voids as needed.
¨
Verify that the lavatory has not moved out of position.
¨
Allow the sealant to cure for at least 30 minutes before proceeding.
¨
Connect and tighten the trap to the drain, and complete the water supply
connections to the faucet according to the instructions packed with the
faucet.
¨
Run water into the lavatory and check for leaks.
CAUTION: Risk of personal injury or product damage.
Handle
with care. Vitreous china can break or chip if the product is handled
carelessly.
