1334585-T01-A
7.
处理器和组件的连接
快捷连接方式
第一步连接：
将处理器对准固定装置的下端，再将处理器的卡锁插入装配环
（见图
7A
），向右转动装配环大约
6mm
，使处理器暂时卡住。
第二步连接：
转动装配环和处理器，直至处理器的污物排出口与排水管道对准
（见图
7B
）。
Quick connection method
Connection step I:
Align the disposal with the lower end of the fixing device, then
insert the latch of the disposal into the mounting ring (see
Figure 7A). Turn the mounting ring about 6mm to the right and
temporarily jam the disposer.
Connection step II:
Rotate the mounting ring and disposal until the sewage outlet is
aligned with the drain line (see Figure 7B).
6A
6B
6. FIXATION OF DRAIN ELBOW
6.
排水弯管的固定
A.
将排水弯管接到处理器上（见图
6A
）拧紧螺丝。
B.
确认所有的管件已接连牢固。
A. Connect the drain elbow to the disposal (see Figure 6A) and
tighten the screw.
B. Confirm all the pipe fittings are connected firmly.
7. CONNECTION OF DISPOSAL AND
COMPONENTS
7A
Locking Slot
卡槽
Latch
卡锁
7B
Outlet
排出口
Drain line
排水管道
-7-
