Kohler K-17641, Installation Manual

Page: 5 / 16

Kohler Co. 5 1049369-X2-A
† Place the bowl and push up against the wall.
† Check the mounting hole with bowl on the floor.
† Carefully remove the bowl from the installation area.
†
Drill 3/8” (10 mm) mounting holes between the marked locations
on the floor and insert the anchor.
4. Install the New Bowl
† Install the washer over the bracket and insert the hexagon screw into
the bracket through the washer then tighten the screw.
† Align the bowl back to position over the brackets.
† Install the sleeves and tighten the screw.
† Attach the caps.
CAUTION: Risk of product damage. Overtightening may cause
breakage or chipping of the vitreous china.
Cap