Product Information
Applicable product:
Drop-in rim style
K-1239-H
Integral flange, left drain
K-1239-LH
Integral flange, right drain
K-1239-RH
Fixture*:
Bathing well:
Basin area, bottom
46
″
(116.8 cm) x 24
″
(61 cm)
Basin area, top
54
″
(137.2 cm) x 27
″
(68.6 cm)
Weight
110 lbs (49.9 kg)
To overflow:
Water depth
14
″
(35.6 cm)
Capacity
63 gal (238.5 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58
″
(147.3 cm) x 34
″
(86.4 cm)
V
Hz
A
Pump: 1-speed
120
60
7.5
Heater: 1.5 kW
120
60
12.5
Minimum access panel
pump/control (required):
20
″
(50.8 cm) W x
15
″
(38.1 cm) H
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Heater
120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24
″
(61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
44 lbs/square foot (215 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected with
drain illustrated. (K-7161-AF or K-7161M-AF)
18-1/2"
(47 cm)
20"
(50.8 cm)
8-11/16" (22.1 cm)
1-11/16"
(4.3 cm)
3"
(7.6 cm)
2-7/8"
(7.3 cm)
1" (2.5 cm)
3-1/2"
(8.9 cm)
18"
(45.7 cm)
60" (152.4 cm)
1-1/2" OD
36" (91.4 cm)
Pump/Control Access
(if apron is not used)
20" (50.8 cm) W x
15" (38.1 cm) H
1-1/4"
(3.2 cm)
1/2" (1.3 cm)
R. Max
Integral
Flange Detail
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
Recommended Faucet Area
1014697-1-B
2
Kohler Co.
