4.
5
4. Hang the
cabinet on the wall, and position
the suspension on the hanged bracket. See Fig.5.
full-length mirror
Fig.5
5
Fig.6
6
Cabinet
Back
-5-
5. Set the
cabinet onto the wall bracket. Be
sure the cabinet adjusted level and the back board of
cabinet appressed to the wall by adjusting the screws of
wall clips.
6. Mark the wall through one hole at the corresponding
positions as illustrated in Fig 5.
7. Dismount the
cabinet and put aside. Drill
holes at the marked position.
8. Insert the plugs into the wall.
See Fig.5.
Avoid the cables and pipes inner set when
drilling in the wall.
Different types of bolts are required for different
decoration boards. Please apply suitable bolts and plugs.
Caution!
Note:
full-length mirror
full-length mirror
5.
5
6.
5
8.
7.
9. Set the full-length mirror cabinet onto the brackets, adjust
the screw of the suspension patch with cross screwdriver
to make the cabinets level and at the same height. Upper
screws are for forward and backward adjustment and lower
screws are for upward and downward adjustment. Cover
the hole with the hole cap.
9.
1419266-T01-A
