-5-
Fig.8
8
Fig.9
9
12.
(
)
13.
14.
8
12. Adjust the screw with the wrench supplied to lift the
support foot and make sure it is firmly attached to the
cabinet bottom.
The support foot is the important part that must be
installed to prevent the cabinet from descending. It must
be firmly attached to the cabinet bottom (use the wrench
until the screw is completely tightened.)
Note:
13. Place the hinge cover and plastic cover.
14. Adjust the hinge of door in 3 direction to make sure the
door level.
C.
1.
(P
)
/
U
C. Connect Drainage
1. Inwall drainage (P-Trap)
Please install the drain assembly and faucet as shown.
Please set the water supply and drainage position
according to the suppliers instructions. You can put the
pipe into the U Notch.
Faucet
Supply Lines
Shut-off Valve
Drain Assembly
B.
B. Install the Synthetic Top
Note:
Please refer to the installation instructions of synthetic
top for its installation. To protect the cabinet from
dampness, please apply silicone sealant where the
synthetic top and the cabinet connect.
1356924-T01-A
