background image

Page 2

INSTALLATION INSTRUCTIONS

FREE STANDING BATHS

ENGLEFIELD

5)   Raise the Free Standing bath off the floor by propping it up onto timber blocks 
      positioned at either end of the bath. Install and connect the waste outlet.

 

7)   Carefully remove the timber blocks and use a spirit level to check that the bath is level 
      with the floor, adjust feet as necessary. 
    

    

  
      

 

Product 

 

                                                             Part Number

   

 

     

 

             

  

 

 

 

     

 

      

   

40mm pop-up bath waste            
   

   

99329A-CP

6)   Adjust the feet so that the bottom of each foot is protruding approximately 3 to 5mm from 
      the underside of the bath. The feet must extend past the bath shell to take the weight 
      of the bath. Feet should be level with each other so that the weight of the bath is evenly
      supported by the four feet.

Self-sealing trap with flexible waste pipe

80144A-NA

Recommeded products are:

 

8)   Carefully tilt the bath backward and apply an appropriate adhesive to each of the bath 
      feet. Lower the bath back into position.        
    

    

Summary of Contents for Englefield Valencia 1500 FS

Page 1: ...hing experience the very best it can be Valencia 1500 FS Bath Valencia 1700 FS Bath Part number 24247A 0 Part number 24248A 0 Sierra 1500 FS Bath Sierra 1700 FS Bath Part number 24249A 0 Part number 24250A 0 Product Part Number ROUGH IN DIMENSIONS Rough in dimensions NOTE Check the rough in and room dimensions to provide adequate available space for the bath unit Check the flooring under designate...

Page 2: ...ructions for the consumer after installation INSTALLATION INSTRUCTIONS FREE STANDING BATHS BEFORE YOU BEGIN TOOLS AND MATERIALS REQUIRED ENGLEFIELD INSTALLATION Note Instructions drawings and diagrams contained in this manual present information available at the time of printing Although every attempt has been made to keep them up to date Englefield reserves the right to implement product changes ...

Page 3: ... Product Part Number 40mm pop up bath waste 99329A CP 6 Adjust the feet so that the bottom of each foot is protruding approximately 3 to 5mm from the underside of the bath The feet must extend past the bath shell to take the weight of the bath Feet should be level with each other so that the weight of the bath is evenly supported by the four feet Self sealing trap with flexible waste pipe 80144A N...

Page 4: ...eaning instructions For warranty information please visit our website CLEANING AND MAINTENANCE INSTRUCTIONS Installation complete Valencia Free Standing Back To Wall Baths Sierra Free Standing Back To Wall Baths Ensure that the silicone sealant is applied along the back edge of the bath Ensure that silicone sealant is applied along the back edge and top edge of sides of bath that are adjacent to a...

Reviews: