background image

5

62 590 12 Rev. B

KohlerEngines.com

Maintenance Instructions

 

WARNING

Before working on engine or equipment, disable 

engine as follows: 1) Disconnect spark plug 

lead(s). 2) Disconnect negative (–) battery cable 

from battery.

Accidental Starts can cause 

severe injury or death.
Disconnect and ground spark 

plug lead(s) before servicing.

Normal maintenance, replacement or repair of emission control devices and systems may be 

performed by any repair establishment or individual; however, warranty repairs must be performed 

by a Kohler authorized dealer found at KohlerEngines.com or 1-800-544-2444 (U.S. and Canada).

Oil Recommendations

We recommend use of Kohler oils for best 

performance. Other high-quality detergent 

oils (including synthetic) of API (American 

Petroleum Institute) service class SJ or higher 

are acceptable. Select viscosity based on air 

temperature at time of operation as shown in 

table below.

°F -20

0

20

32 40

60

50

80

100

°C -30

-20

-10

0

10

20

30

40

75

10W-30

 5W-30

SAE 30

20W-50

Check Oil Level

NOTE:   To prevent extensive engine wear or 

damage, never run engine with oil level 

below or above operating range 

indicator on dipstick.

Ensure engine is cool. Clean oil 

fi

 ll/dipstick 

areas of any debris.
1. Remove dipstick; wipe oil off.
2. Reinsert dipstick into tube; rest cap on tube, 

do not thread cap onto tube.

3. Remove dipstick; check oil level. Level 

should be at top of indicator on dipstick.

4. If oil is low on indicator, add oil up to top of 

indicator mark.

5. Reinstall and secure dipstick.

Maintenance Schedule

Every 100 Hours or Annually¹
 

 Change oil. Oil 

fi

 lter is recommended.

 

 Remove cooling shrouds and clean cooling areas.

Every 150 Hours¹
 

 Check air cleaner element.

 

 Replace unique Electronic Fuel Injection (EFI) fuel 

fi

 lter.

 

 Check oil cooler 

fi

 ns, clean as necessary.

Every 200 Hours
 

 Change oil 

fi

 lter.

Every 300 Hours
 

 Replace air cleaner element and check inner element.

Every 600 Hours
 

 Replace air cleaner inner element.

 

 Replace spark plugs and set gap.

1

 Perform these procedures more frequently under severe, dusty, dirty conditions.

Summary of Contents for Command PRO ECV940









Reviews: