4
6. INSTALLING THE SHELVES – see Fig. 10
1. Push/twist the pins
into place
A. Push one side of
the shelf into the
left or right clips
B. Snap the shelf
down into the
opposite side. If
the shelf is too
tight, repeat the
process from the
other side.
2. Fill the remaining
holes with the plugs.
Fig. 10
Door
Bumper
5. INSTALLING THE TOOTHBRUSH COVERS & DOOR BUMPERS – see Fig. 9
1.
Install the clear door bumpers in the round indent
area at the top and bottom of the door.
Fig. 9
A
B
2
Parts supplied with your cabinet.
(For cabinet body and door replacement, call customer service with model
number.)
Be sure to check the cardoard supports in the carton, glass parts are packed in them.
4 Side Kits brackets
Part List
- BAGCLCS (silver) BAGCLCW (white)
2 Glass Shelves
1
BC-
BAGCLCHGE
Hinge Kit
Snap-in Pins
Side
Mirrors
11” Mounting Bar
Door Bumpers
#8 X 1/2” Phillips
Head Screws
Screw Caps
Silver or
White
Top Clips
Wall Anchors
#8 X 2” Hex Head Slotted
Screws
Hole plugs
White or
Silver
4 Side Kits Bracket
Foam tape
Checklist • Care & Maintenance
1. Cleaning
A. The cabinet door and interior are constructed of mirror and
aluminum. Use only a damp cloth to clean. Spray the cloth,
not the mirror when cleaning. Mirrors are damaged by the use
of ammonia or vinegar based cleaners. Rubbing alcohol can
be used for stubborn stains.
B. Use no abrasive cleansers on any part of the cabinet.
C. The white frame should be cleaned with a damp cloth only.
#8” X 3/8” Screws
1070225-2-A
CB-BAGCLCS (Sliver) or
CB-BAGCLCW (White)
(
CB-
SHLFCLC15 &
CB-
SHLFCLC20)
(
CB-RO331100M)
