INSTALLATION
·
·
·
·
·
·
·
·
·
·
·
·
Install the Toilet Seat
·
·
·
·
·
·
·
·
·
·
·
Remove the existing toilet seat and
mounting hardware.
If necessary, clean the toilet surface.
Position the mounting bracket with
flat side up and align the holes to the
toilet seat mounting holes.
Insert the bolts through the mounting
bracket and the toilet seat mounting
holes.
Thread a nut onto each bolt.
Using a screwdriver and an
adjustable wrench, tighten the nuts.
If the toilet is pre-drilled with a screw
hole, just turn the screw into the
screw hole and leave the nut aside.
Position the toilet seat over the bowl
and slide the toilet seat hinge plate
onto the mounting bracket. Press
firmly into place.
Insert the hinge cover tabs into the
hinge slots.
Press the hinge cover down until it
snaps into place over the mounting
bracket.
Verify the seat is securely fastened.
Make any adjustments as needed.
Do not overtighten.
Fig. #1
1
OPERATION
Your Kohler toilet seat is designed to
close slowly when the lid is dropped.
To close the seat, simply flip the lid
forward.
The toilet seat also has an easy-to-
clean quick-release hinge that allows
the toilet seat to be quickly removed
for complete cleaning.
The hinge covers are easily lifted using
a fingertip. If room is tight, push the
toilet seat back to ease the hinge
cover operation.
Once the hinge covers are lifted, pull
the toilet seat forward leaving the
mounting hardware in place.
After cleaning, simply push the toilet
seat back into place on the mounting
hardware and close the hinge covers.
Fig. #2
2
2
Tabs
Hinge Cover
Bolt
Nut
Hinge Slots
Seat
Mounting Bracket
Nut
Bolt
Hinge Plate
1092
3
00-T01-D
