Faucet Hole Locations
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 Hz
Blower:
Technical Information
All product dimensions are nominal.
Measure your actual product for roughing-in
details.
Freestanding
Installation:
End
Drain location:
Install this product in accordance with the
installation instructions.
51-1/16" x 19-11/16" (1297 mm x 500 mm)
Basin area, bottom:
58-9/16" x 25-5/16" (1487 mm x 643 mm)
Basin area, top:
Locate a GFCI-protected 120 V, 15 A, grounded
electrical outlet behind the bath and within 24"
(610 mm) of the blower motor.
100 lbs (45.4 kg)
Weight:
44.2 lbs/ft² (215.8 kg/m²)
Minimum floor load:
15-1/16" (383 mm)
Water depth:
Remote blower installation kit K-1446 is available
for relocating the blower.
65 gal (246.1 L)
Water capacity:
Footprint, 1265461, not required, not
included
Template:
This bath is designed for freestanding installation
only.
Blower: 120 V, 10 A, 60 Hz, 300 W
Electrical component
rating:
NOTICE: Do not support the load weight of the
bath by the rim.
Variable
Blower speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
3-18-2017 06:41
Archer
®
68" BubbleMassage
™
Bath
K-2595-G