INSTALLATION
A. Install the Plumbing and Accessories
Install the services.
Hot (H) and Cold (C) inlets must be connected to the correct
inlet pipes.
Install the drain in accordance with the manufacturer s
instructions.
We suggest using P-trap drain. Connect P-trap pipe with
washbasin drain.
Make sure a watertight seal exisits on all
washbasin drain connections.
Provide access to the plumbing connections
for future plumbing maintenance.
The hot and cold water supplies must be installed with
isolating valves.
Caution!
Caution!
Note!
A.
(H)
(C)
P
B. Install cabinet
Insert wood plug into holes on both sides of the
middle
bar,
back bar and
bottom board. Connect with
side
shelf and fix with screw and gasket. (Lock the
back bar
through the back hole with tapping screws.)
Do the same to the other side shelf.
Insert the
front bar and
back board downwards to their
corresponding positions.
Wall-hung installation is recommended to secure the
cabinet. Please follow the instructions below.
Put the cabinet against wall. If necessary, adjust the
adjustable legs to make the cabinet level.
Mark the hole for the back bar on the wall with pencil.
Move away the cabinet, drill holes and insert anchors.
Put the cabinet back and fix with screws.
Install the
drawer and
door (refer to the installation
instructions that follows). Fix the handle and complete
installation.
Note:
WARNING: Risk of property damage.
NOTE:
The vanity is
heavy and cumbersome to move. Obtain sufficient
help to carefully lift or move the vanity to avoid
impacting, sliding, or side-loading the legs.
To protect the finished surface of the vanity, perform
assembly tasks on a flat, padded work surface.
!
!
!
!
!
!
!
B.
·
·
·
·
·
·
·
(
-3-
1230799-T01-A
