-4-
11.
8
11. Apply a washer to the screw before tighten it. Make sure
the washbasin cabinet has been fixed firmly on the wall.
See Fig.8.
5.
5
5. Set the washbasin cabinet onto the wall bracket. Be sure
the cabinet adjusted level and the back board of cabinet
appressed to the wall by adjusting the screws of wall clips.
See Fig.5.
6. Mark the wall through two holes at the corresponding
positions as illustrated in Fig 6.
7. Dismount the washbasin cabinet and put aside. Drill holes
at the marked position.
8. Insert the plugs into the wall.
9. Take out the middle leg and screw from the hardware pack.
Align with the hole on the bottom board and fix the middle
leg, as shown in Fig.7.
Caution!
Note:
Avoid the cables and pipes inner set when
drilling in the wall.
Different types of bolts are required for different
decoration boards. Please apply suitable bolts and plugs.
6.
6
8.
9.
7
7.
Fig.5
5
Fig.6
6
MAX1
2
4
3
1
10.
5
10. Set the washbasin cabinet onto the brackets. Be sure the
cabinet adjusted level and the back board of cabinet
appressed to the wall by adjusting the screws of wall clips.
See Fig.5.
8
8
Fig.8
8
Fig.7
7
1374323-T01-A
