1287541-2A-B
2
1287541-2A-B
3
INSTALLATION
Install the mounting stud(1) into the faucet body base(2).
Insert the washer (3) under the body assembly. Insert the
flexible supply hoses(4) into the sink.
From underside of the sink, place the washers(5, rubber
washer is on the top) and the nut(6) onto mounting stud.
Position the faucet so that the handle is on the right side.
Tighten the nut by tool(7) to secure the faucet.
Attach the hoses to water supplies. The hose with "COLD"
label is for cold water.
74053T-4E2
Tube Spout Kitchen Faucet
TAUT
SERVICE PARTS
INSTALLATION CHECKOUT
Ensure that all connections tightened and the handle is in
the off position.
Open the drain. Turn on main water supply and check for
leaks. Repair as required.
Remove the aerator(8). Turn the faucet handle on. Run hot
and cold water through the spout for about one minute to
remove any debris. Remove debris from the aerator. Shut
off the faucet and reinstall the aerator.
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953
8
1068126
1209778**
1209777
1196248
833438
3008523
1287547**
836549
1239358
1239354**
1080817
1239352
1243529**
1146748
1073951
1243532**
1103116
3002868
**Color code must be specified when ordering.
5
6
4
1
3
2
1228834
7
