1279538-AN2-A
2
1279538-AN2-A
3
INSTALLATION CHECKOUT
Ensure that all coupling nuts tightened. Ensure that
the handle is in the off position.
Turn on the drain and main water supply, and check
for leaks. Repair as needed.
Remove the aerator(8) with the key(9) provided. Turn
on mixer handle. Run hot and cold water through
spout for about one minute to remove any debris.
Check for leaks at this time. Remove any debris from
the aerator assembly. Shut off the mixer. Reinstall the
aerator assembly.
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
INSTALLATION
How to Install the Basin Mixer
Screw the stud(1) to the thread hole on the bottom of
faucet body(4). Put the washer(2) into the bottom of
faucet body through the flexible hoses(3) and the
stud. Insert hoses and stud into the hole of basin.
Position the faucet on the basin. From underside of
the basin, fit the washer(5) and washer(6) on the stud.
Secure the mixer by tightening nut(7).
Attach the hoses to water supplies. The hose with
blue dot connects to cold water.
1
4
2
5
6
7
3
8
9
72842T-4ND
Single Lever Basin Mixer
72843T-4ND
Single Lever Tall Basin Mixer
SERVICE PARTS
**Color code must be specified when ordering
STANCE
1231663**
1041450
1231661**
1088909
1100166**
1233281
871568
1177299
870721
1278507
1278507
836664
1176148
1231665
