1-2 Specifications
TP-5631 7/96
Controller
Controller Features
The generator set is equipped with either a relay
controller or a 5-light microprocessor controller. For a
specific description of the controller, see Section 2,
Operation. Controller features include the following:
Relay Controller
D
Fault shutdowns with common indicator:
d
Level, low coolant (liquid-cooled models only)
d
Overcrank
d
Overspeed
d
Pressure, low oil
d
Temperature, high engine
D
Running time meter
D
Switches and standard features:
d
Cranking, cyclic
d
Start, remote two-wire
d
Switch, run/off-reset/auto (engine start)
5-Light Controller
D
Analog gauges, 2 in. (51 mm), 2% full-accuracy:
d
Pressure gauge, oil
d
Temperature gauge, engine water (liquid-cooled
models only)
d
Voltmeter, DC only
D
Analog meters, 3.5 in. (89 mm):
d
AC ammeter, 2% full-scale accuracy
d
AC voltmeter, 2% full-scale accuracy
d
Frequency meter, 0.5% full-scale accuracy
D
Fault shutdowns and status indicators:
d
Auxiliary (red)
d
Level, low coolant (uses auxiliary fault
indicator)(liquid-cooled models only)
d
Overcrank (red)
d
Overspeed (red)
d
Pressure, low oil (red)
d
Temperature, high engine (red)
d
Temperature, low water (red)*(liquid-cooled
models only)
*Requires optional kit or user-provided device
for lamp to function.
D
Running time meter
D
Switches and standard features:
d
Cranking, cyclic
d
Horn, alarm (with silence switch)
d
Rheostat, generator output voltage-adjusting
(front panel mounted,
±
5% of nominal voltage)
d
Start, remote two-wire
d
Switch, lamp test
d
Switch, meter range selector
d
Switch, run/off-reset/auto (engine start)
d
Timer, engine cool down (5-minute fixed)
