Kohler 23776T-7 Installation Instructions Download Page 1

Page: 1 / 4

1388387-2A-A

23776T-7

Bath Filler UI

DTV MODE

BEFORE YOU BEGIN

INSTALLATION INSTRUCTIONS

25.3

Ø35

Ø3.5

42Max

25.3

ROUGH-IN DIMENSIONS

Ø64

All information is based on the latest product information available at the time of publication. Kohler Co. reserves

the right to make changes in product characteristics, packaging, or availability at any time without notice.

Please leave these instructions for the consumer. They contain important information.

NOTES:

1. Observe

all plumbing, electrical, and building codes.

2. Isolate the electrical and water supplies before commencing installation.

3. DO NOT modify or extend the cables supplied with the product.

4. When possible, install the valve prior to installing the interface.

5. Ambient Temperature: 1°C - 40°C; Maximum Relative Humidity: 95% non-condensing; Supply Voltage: 12
Vdc SELV(Safety Extra-Low Voltage ) 2W max.

Summary of Contents for 23776T-7

Page 1: ...vailability at any time without notice Please leave these instructions for the consumer They contain important information NOTES 1 Observe all plumbing electrical and building codes 2 Isolate the elec...

Page 2: ...ce in the backplate and press down to secure in position Notes Insert one end of a hex wrench into the hole on the backplate to remove the button replace it if needed during maintenance NOTES Do not p...

Page 3: ...n the bath spout On Off Bath Spout Symbol Bottom Button Turn bath spout On Off NOTES Press either the On Off button or bath spout button can turn on off the spout But the water flowrate is different u...

Page 4: ...s duration at 42 C Inlet Temperature Bath Fill Preset temperature will calculate the average temperature over the Preset fill duration take into account adjustments made to the User Interface rotary t...