Kohler 12695A-0, Installation & User Manual

Page: 5 / 12

3
Bracket
Drill 3/8” (10 mm) mounting hole between the mark locations on the floor
and insert the anchor. Install the washer and insert the hexagon screw into
the bracket then tighten the screw. Install the sleeves, tighten the screw and
attach the caps.
4
Screw
Drill 5/16” (8 mm) mounting hole at the marked locations. Insert anchors into
the holes. Place the toilet and aligh anchoring holes position. Tighten screws and
attach the bolt caps.
Floor fixing option
ENGLEFIELD
5 1104782-A2-D
Anchor
Screw
Sleeve
Hole
Cap
Hexagon
Lag Screw
Bracket
Washer
Anchor
Fixing Holes
Screw Cap
Screw
Anchor
Sleeve
Drill