Insert the waste pipe connector
into the pan collar.
It may be necessary to trim the
waste pipe connector by approx
15mm so that it fully engages the
pan collar.
Check the fit of the assembled
con pan collar between
pan, wall and waste pipe.
For mid-range set-outs (reduced
offset), rotate pan connector along
the axis of the spigot, while rotating
the offset pan collar as required.
Cut the Screw Connector Bracket
to length, slot it over the mount on
the rear of the Spigot Connector
and attach to the wall.
Lubricate Diaphragm Seal and
carefully push the toilet pan back
into the Vario Connector.
Proceed with pan installation as
per the instructions supplied with
the toilet.
1109493-A02-E 23/09/15
