Koganei IB Series, Quick Start Manual

Page: 3 / 12

●
❷
Order codes
●Manifold
● End block (left-right set)
IBZR8Z -
● Single valve unit (The single valve unit cannot be used alone.)
■
Valve specifications
■ Valve specifications
■
Manifold format
Manifold is
complete.
■
Specifications for fittings of pipe ports
■ Wiring specification
■
Wiring specification
■ Specifications for fittings of pipe ports
-PL1
-PL1
-PL
-PL
-PLN
-PLN
Note 1: Note1: The maximum number of valves is 20 stations. When the DIN rail mounting bracket is selected, the maximum is 16 stations.
2: After doing connections, before supplying air to the manifold, be sure to check that the connections that were made between each valve and end block are secure.
3: Please separately prepare the DIN rail. When -NS is selected for the maniflod format, the DIN rail mounting brackets will be attached parts.
4: Valve positions are counted from the left side of the manifold.
5: Common connector assemblies are available for common wiring connections. For details, see page ❸ .
6: When connecting common wires between double solenoid valves on the 12 (SB) side, connections are possible between double solenoid valves if 1single solenoid valve is mounted between them, or even if
1 intermediate piping block is mounted between them. However, connections cannot be done if there are two or more, due to the relative length of the branch wires for common connections.
7: For questions regarding support for 5-V, 6-V, and 12-V DC products, contact our sales office.
8: (mm) fitting and (in.) fitting valves cannot be mixed in the same manifold.
Remarks: The gasket is installed in the valve body. Two mounting screws (bracket attached) are provided with the valve body.
Note: For questions regarding support for 5-V, 6-V, and 12-V DC products, contact our sales office.
The manifold can be easily made by assembling the end block and the valve.
See page
❹
for details
IBZR8
stn.1
···
stn. □
Note 4
N
NS
Note 2
IBZR8M
-4E1
-4E2
-4E1
-4E2
-PL
-PL1
-PLN
24 VDC
Note
24 VDC
Note 7
Model
IBZR8
Model Model Number of valves Manifold format Piping block
Manifold model Model of mounted valve
Valve specifications
Valve specifications
Specifications for fittings of pipe ports Wiring specification
Specifications for fittings of pipe ports Wiring specification
Voltage
Voltage
Right side
Left side
-4E1: 5-port, 2-position single solenoid
-4E2: 5-port, 2-position double solenoid
-4E1: 5-port, 2-position single solenoid
-4E2: 5-port, 2-position double solenoid
N: Finished product has each valve
connected
(fixed with mounting screw (bracket attached))
NS: Semi-finished product before
each valve is connected Note 1
* Mounting screws (bracket attached)
must be used to connect and fix each
valve before use.
(mounting screw (bracket attached) provided)
-J42: quick fitting for φ 4 [0.157] tubes
-J62: quick fitting for φ 6 [0.236] tubes
-J82: quick fitting for φ 8 [0.315] tubes
+
Each type of valve
End block
Single solenoid Double solenoid
4 (A)
2 (B)
12 (SB)
14 (SA)
4 (A)
2 (B)
14 (SA)
3 (R2)
5 (R1)
1 (P)
3 (R2)
5 (R1)
1 (P)
L type plug connector
Lead wire 300 mm [11.8 in]
L type plug connector
Lead wire 300 mm [11.8 in]
L type plug connector
Lead wire 1000 mm [39 in]
L type plug connector
Lead wire 1000 mm [39 in]
L type plug connector
No connector
L type plug connector
No connector
Mounting screw
(bracket attached)
-PJ(If an intermediate piping block is mounted on the specified station)
-PL3/8
Note 8
-J42 ： quick fitting for φ 4 [0.157] tubes
-J62 ： quick fitting for φ 6 [0.236] tubes
-J82 ： quick fitting for φ 8 [0.315] tubes
-J5/32 ： quick fitting for 5/32 in. tubes
-J1/4 ： quick fitting for 1/4 in. tubes
-J5/16 ： quick fitting for 5/16 in. tubes
-J5/32
-J1/4
-J5/16
-J42
-J62
-J82
E ： quick fitting for φ 10 [0.394] tube
E3/8 ： quick fitting for 3/8 in. tube
-J5/32: quick fitting for 5/32 in. tubes
-J1/4: quick fitting for 1/4 in. tubes
-J5/16: quick fitting for 5/16 in. tubes
-CPL
Pre-wired positive
common terminal
Note6
Lead wire 300mm
■ Mounting
Blank: Direct mounting
-DN: With DIN rail mounting bracket
Note 1,Note 3
■ Piping block
Blank: Quick fiting for φ10mm tube
-J3/8: Quick fiting for 3/8 inch tube
Blank
-DN
Note 1,Note 3
Mounting
Blank
-J3/8
Note 8
Stations
-J5/32
-J1/4
-J5/16
-J42
-J62
-J82
Note 8
Note 8
Note 8 Note 8
Note 8
Note 8
-PLN
-CPL
-PL
-PL1
Note 5
Note 6
1
・
・
・
20
（
16
）
Note 1